SILENT COMPRESSOR


In the event of the incoming instantaneous flow being too weak, for the average 100l of  air injected per m³ pumped to be enough to sufficiently aerate the DIP discharge, iit is recommended to aerate the fluid volume within the piping using an additional compressor.

The inherent ability of the DIP to reject air bubbles which may form in the upper part of the discharge, and its very short stopping times, enable continuous injection to be used at the rate of 150 l/h per m³ within the discharge volume.

These particularly low-noise silencers can be installed directly in the ecnlosure housing the  DIP, and the injection point must be connected after the anti-return valve of the discharge column.

 

TECHNICAL DESCRIPTIVE


230V SINGLE-PHASE OIL BATH MOTOR.

TANK WITH  PRESSURE AND FLOW CONTROL

30 - 40 dBA maximum

SIL-AIR 15/A
17L/min  

    

SIL-AIR 30/6
25L/min - 8bar - 6L

     

SIL-AIR 50/24
50L/min - 8bar - 24L

SIL-AIR 100/24
100L/min - 8bar - 24L

 

SIL-AIR 100/50
100L/min - 8bar - 50L

 

SIL-AIR 150/50
150L/min - 8bar - 50L

 

 

SIDE INDUSTRIE - 2 bis avenue du Général De Gaulle - 77250 VILLEMER Tél : +33 (0)1 60 39 52 61 - Fax : +33 (0)1 60 39 51 80

SIDE INDUSTRIE USA - 1714-1716 Fair Lane, Manhattan, KS 66502, USA - Office : +1 (785) - 537-00-10

mentions légales

Aloner SAS